Reference: CAPOTO0022
Expandable sleeve in percussion polypropylene for EPS plates
Reference: TUBCORV006
Corrugated 40mm Ited tube special for telecommunications, it is applied essentially in underground conduits for electric cables. The smooth interior and the corrugated exterior provide an improvement in resistance to compression and impact, making the flexibility constant, which facilitates the installation of electrical cables.Price per meter of tube.
Reference: TUB005
Promote the mechanical protection and insulation of electrical and communication cables in underground installations or embedded in civil construction structures in general, allowing the pulling of cables and / or their replacement. Price per linear meter.
Reference: PLADUR0042
The metallic brass bushing with metric thread inside and with a rough outer surface, to provide a better grip inside the hole. The reduced body of the bushing makes it suitable for applications in solid, thin-based materials. Main advantages: Smooth expansion due to the grooves in the bushing body; Rough surface to prevent rotation inside the hole;...
Banner
There are 42 products.
Reference: TUBMI00124
The pre-installation box, as the name implies, is the ideal system for pre-assembling air conditioning systems.Thus, it is possible to leave during the construction phase all necessary connections for the future installation of the appliance.It has a plastic cover to protect the pipes.
Reference: TUBMI00003
AFS expansion vessel carbon steel with 24 liter membrane.
Reference: TUBMI00002
Water pressure stabilization.STAINLESS STEEL autoclave with 24 L membraneAISI 444 stainless steelGlossy finishØ 318 mmHeight 380 mmConnection 1 "EPDM membrane certified for drinking waterAir valve with cover
Reference: TUBMI00016
Applications: Automation of starting and stopping electric pumps up to 2HP. Attention: Max. not adjustable, depends exclusively on the electric pump used. Operation: The electric pump starts after opening a tap (pressure drop) and stops a few seconds after closing it (no flow).
Reference: TUBMI00007
Pressure gauge 1/4 10 barIt can be used for normal pressure tests or for indicating pressure in systems.Suitable for medium or gaseous fluid that does not obstruct the connection port orthe commodity copper alloy.
Reference: TUBMI00005
24-liter rubber membrane (mouth 9) for autoclave.
Reference: TUBMI00247
60 liter rubber membrane for autoclave.
Reference: TUBMI00004
24-liter rubber membrane (mouth 8) for autoclave.
Reference: TUBMI00264
Peripheral centrifugal pumps, capable of high pressures and small flow rates, suitable for small pressure groups.OperationFluid: Clean water and non-aggressive or viscous liquids, free of solid substances.Maximum fluid temperature: 40 ºCMaximum suction height: 7 mConstructive characteristicsPump housing: Cast ironImpeller: BrassMotor shaft: Stainless...
Reference: TUBMI00013
Peripheral centrifugal pumps, capable of high pressures and small flow rates, suitable for small pressure groups.OperationFluid: Clean water and non-aggressive or viscous liquids, free of solid substances.Maximum fluid temperature: 40 ºCMaximum suction height: 7 mConstructive characteristicsPump housing: Cast ironImpeller: BrassMotor shaft: Stainless...
Reference: TUBMI00263
OperationFluid: Clean water and non-aggressive or viscous liquids, free of solid substances.Maximum fluid temperature: 60 ºCMaximum suction height: 9mMaximum height 42 meters.Flow rate 60L / min.Constructive characteristicsPump housing: Cast ironPump support: Cast ironImpellers: Noryl or BrassDiffusers: NorylMotor shaft: Stainless steel AISI 416Mechanical...
Reference: TUBMI00015
Electric pump for dirty water.STAINLESS STEEL body:Electric motor with built-in protection thermal • 230 V • 50 HzMaximum fluid temperature 35ºC •Maximum ambient temperature 40ºC • IP 68.Volts: 230VWatts: 750WAmp: 4.8AOutput: 1.1 / 2 "MCA: 0-8 L / H 14000-12001st: 20Main uses: Drainage of water containing small solid particles.
