Drill for iron 5.50mm cobalt

Reference: CORTE0161

Brand: Cofan

Wood Drill 3 Tips 16 x 160

Three-point "professional" wood drill bits. In high speed steel ground, with centering point and cutting lips. Measurement (diameter X length mm): 16X160

Reference: CORTE0056

Brand: Pecfix

SDS Plus Slot Stone Drill Nª8x210

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0179

Brand: Blofer

Blofer Disc General Work 115-H 7mm

High quality disc for dry cutting with an angle grinder, 7mm cutting capacity of any type of materials for general use on site, such as: ceramics, brick, cement, stone, etc.

Reference: CORTE0085

Saw blade for green wood cutbrik 300mm

Blade saw with teeth suitable for green wood, tips hardened by a high frequency induction system, technically calibrated. High quality tempered steel blade. Greater durability. Clean and easy cut. Saw blade with alternating tooth. Size: 12"-300mm

Reference: CORTE0042

Cobalt Iron Drill 10.00mm

High performance cobalt drill bit. For steel and iron. Bright ocher color Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 10.00mm

Reference: CORTE0176

Brand: Cofan

Wood Drill 3 Tips 10x120

Three-point "professional" wood drill bits. In high speed steel ground, with centering point and cutting lips. Measurement (diameter X length mm): 10X120

Reference: CORTE0118

115mm Stainless Disc - Unit

It guarantees maximum stability and work safety, thanks to the precisely manufactured fiberglass net. The CHEMITOOL Stainless Steel Cutting Wheel guarantees great cutting performance, always with maximum safety. Indicated for professional work of fine cutting in stainless steel.

Reference: CORTE0103

Brand: Bellota

Bellota 230 diamond wheel

Bellota 230 diamond disc.Cutting disc made of natural stone, marble, granite, slate, basalt, limestone quartz, siliceous quartz, limestones, marble pumice stone, gneiss, cuartzite, fresh or dry limestone, fresh or dry siliceous concrete, reinforced concrete, cement blocks, cement tubes, limestone, brick among others.Diamond: 230mmHole: 22.23mmRPM / Max:...

Reference: CORTE0036

Drill for iron 4.50mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 4.5mm

Reference: CORTE0114

125mm Stainless Disc - Unit

It guarantees maximum stability and work safety, thanks to the precisely manufactured fiberglass net. The CHEMITOOL Stainless Steel Cutting Wheel guarantees great cutting performance, always with maximum safety. Indicated for professional work of fine cutting in stainless steel.

Reference: CORTE0055

Brand: Pecfix

SDS Plus Socket for Stone Nº8x160mm C

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0158

Brand: Cofan

Wood Drill 3 Tips 08 x 110

Three-point "professional" wood drill bits. In high speed steel ground, with centering point and cutting lips. Measurement (diameter X length mm): 80X110

Reference: CORTE0162

Brand: Cofan

Complete Saw For Iron Cutting

Standard Saw Bow with ABS handle

Reference: CORTE0037

Drill for iron 5.00mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 5.00mm

Reference: CORTE0053

Brand: Pecfix

SDS Plus Stone Insert N 7x160mm

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0117

Sun-flex 125 grinding disc

Disc 125x6x22.23mm Sun-flex.Metal grinding disc for angle grinder.Excellent performance and high resistance.

Reference: CORTE0092

Cutbrik complete saw 530mm

Complete cutbrik saw for light use, with excellent stability and strength. Built-in saw blade tensioning system, ensuring cutting precision and easy saw blade replacement. Tool equipped with a Standard wood saw blade, with tips hardened by a high frequency induction system, technically calibrated and smooth cutting.

Reference: CORTE0051

Brand: Pecfix

SDS Plus Stone Drill N 6x160mm C

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0034

Drill for iron 3.50mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color. Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 3.5mm

Reference: CORTE0151

Arch Wood Cutting Saw 610mm

Arched wood cutting saw. Light saw frame for light use with high strength. Saw equipped with a saw blade with alternating teeth

Reference: CORTE0115

Iron cutting disc 115 Sun-flex

Disc 115x3x22.2mm Sun-flex.Iron cutting disc for angle grinder.Excellent cutting performance and high resistance.

Reference: CORTE0058

Brand: Pecfix

SDS Plus Stone Drill N 10x160 C

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0157

Brand: Cofan

Wood Drill 3 Tips 06 x 90

Three-point "professional" wood drill bits. In high speed steel ground, with centering point and cutting lips. Measurement (diameter X length mm): 60X90

Reference: CORTE0108

Brand: Bellota

General Diamond Diamond Plate Pro 7 Ref: 50712-115mm Bellota

Diamond Acorn Diamond General Pro Segmented Ø115mm.Ref.50712-115Professional Diamond Disc. General of Work. Segmented. 115mm. Laser.Made of high quality diamonds.

Reference: CORTE0041

Cobalt Iron Drill 8.00mm

High performance cobalt drill bit. For steel and iron. Bright ocher color Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 8.00mm

Reference: CORTE0105

Brand: Macfer

230 MacFer segmented diamond wheel

Diamond segmented disc 230.Concrete cutting disc, construction brick, hydraulic mosaic, stone, normal tile, tile among others for angle grinders.Diamond: 230mmHole: 22.23mmRPM / Max: 6,600Cool every 60-80 sec.Excellent performance and high resistance.

Reference: CORTE0127

Grinding wheel 76 for mini 30 angle grinder

Conical grinding cup grinding wheel for portable machines, for angle grinders. For grinding and polishing stone. Surface grinding is the initial process in surface treatments and finishes. Conical cup grinding wheels are composed of resins and silicon carbide with different hardness and grain size, being pressed and subsequently being fired at high...

Reference: CORTE0091

Complete saw cutbrik 300mm Iron/wood

Complete cutbrik saw for light use, with excellent stability and strength. Built-in saw blade tensioning system, ensuring cutting precision and easy saw blade replacement. Tool equipped with a Standard wood saw blade, with tips hardened by a high frequency induction system, technically calibrated and smooth cutting. I have included an extra saw blade.

Reference: CORTE0121

Sunflex 230x2 stainless steel cutting disc

Disc 230x2x22.2mm Sun-flex.Stainless steel cutting disc for angle grinder.Excellent performance and high resistance.

Reference: CORTE0139

Sun-flex 230 grinding disc

Disc 230x6x22.2mm Sun-flex.Metal grinding disc for angle grinder.Excellent performance and high resistance.

Reference: CORTE0177

Cobalt Iron Drill 6.5mm

High performance cobalt drill bit. For steel and iron. Bright ocher color Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 6.50mm

Reference: CORTE0088

Saw blade for green wood 760mm

Blade saw with teeth suitable for green wood, tips hardened by a highfrequency induction system, technically calibrated. High quality tempered steel blade. Greater durability. Clean and easy cut. Saw blade with alternating tooth. Size: 760mm

Reference: CORTE0133

Drill for iron 2.00mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color. Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 2mm

Reference: CORTE0178

Brand: Blofer

Blofer Disk General Work 230-H 7mm

High quality disc for dry cutting with an angle grinder, 7mm cutting capacity of any type of materials for general use on site, such as: ceramics, brick, cement, stone, etc. For straight cutting only, not suitable for bevel cutting. High speed cutting with high quality finishes

Reference: CORTE0060

Brand: Pecfix

SDS Plus Slot Stone Drill N 10x260mm

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0095

Brand: Mantools

500mm Wide Leaf Wood Saw

Professional saw for carpenter, cutting tool! This saw contains a large leaf, with sharp and locked teeth, it is normally used for sawing wood!

Reference: CORTE0129

Grinding wheel 76 for mini 36 angle grinder

Conical grinding cup grinding wheel for portable machines, for angle grinders. For grinding and polishing stone. Surface grinding is the initial process in surface treatments and finishes. Conical cup grinding wheels are composed of resins and silicon carbide with different hardness and grain size, being pressed and subsequently being fired at high...

Reference: CORTE0086

Saw Blade for Green wood (alternating tooth) - 533mm

High quality tempered steel blade Greater durability | Clean and easy cut Cut green wood. Saw blade with alternate tooth

Reference: CORTE0040

Cobalt Iron Drill 7.00mm

High performance cobalt drill bit. For steel and iron. Bright ocher color Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 7.00mm

Reference: CORTE0174

Brand: Blofer

Extreme Porcelain Blofer Disc 115-H10mm

TURBO XTREM SUPERFINO H10 blade, suitable for cutting ceramic, stoneware, iron-stone and porcelain. It has CENTRAL REINFORCEMENT for better grip to the machine. HIGH YIELD.

Reference: CORTE0160

Brand: Cofan

Wood Drill 3 Tips 14 x 150

Three-point "professional" wood drill bits. In high speed steel ground, with centering point and cutting lips. Measurement (diameter X length mm): 14X150

Reference: CORTE0107

Brand: Bellota

General Diamond Diamond Plate Pro 7 Ref: 50711-115mm Bellota

Diamond Acorn Diamond General Pro Segmented Ø115mm.Ref.50711-115Professional Diamond Disc. General of Work. Segmented. 115mm. Laser.Made of high quality diamonds.

Reference: CORTE0050

Brand: Pecfix

Stone Drill N 6x110mm C / SDS PLus socket

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0054

Brand: Pecfix

SDS Plus Socket for Stone Nº8x110mm C

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0094

Cutbrik complete saw 762mm

Complete cutbrik saw for light use, with excellent stability and strength. Built-in saw blade tensioning system, ensuring cutting precision and easy saw blade replacement. Tool equipped with a Standard wood saw blade, with tips hardened by a high frequency induction system, technically calibrated and smooth cutting.

Reference: CORTE0120

Brand: Cofan

Long Life Lamella Disc 115x60

Flap disc 115, grit 60. Disc for professional use in steel and stainless steel, with an aggressive grinding and exceptional durability of the disc. Specially developed for roughing edges. Burr down to the last grain. Main features: - For stainless steel - Ideal for edges - High removal rate - Comfortable deburring

Reference: CORTE0039

Drill for iron 6.00mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 6.00mm

Reference: CORTE0141

Grinding wheel 76 for mini 100 angle grinder

Conical grinding cup grinding wheel for portable machines, for angle grinders. For grinding and polishing stone. Surface grinding is the initial process in surface treatments and finishes. Conical cup grinding wheels are composed of resins and silicon carbide with different hardness and grain size, being pressed and subsequently being fired at high...

Reference: CORTE0159

Brand: Cofan

Wood Drill 3 Tips 12 x 140

Three-point "professional" wood drill bits. In high speed steel ground, with centering point and cutting lips. Measurement (diameter X length mm): 12X140

Reference: CORTE0116

Sun-flex 115 grinding disc

Disc 115x6x22.23mm Sun-flex.Metal grinding disc for angle grinder.Excellent performance and high resistance.

Reference: CORTE0112

Brand: Macfer

Diamond Disc 115 Extra Ceramic

115 extra ceramic diamond wheel.Stoneware mosaic cutting disc, porcelain stoneware tile, basalt porcelain, granite among others for angle grinder.Diamond: 115mmHole: 22.23mmRPM / Max: 13,200Cool every 60-80 sec.Excellent performance and high resistance.

Reference: CORTE0104

Brand: Bellota

Bellota 230 type ceramic diamond disc

Bellota 230 diamond disc.Solid band cutting disc made of natural stone, marble, granite, slate, basalt, limestone quartz, siliceous quartz, limestones, marble pumice stone, gneiss, cuartzite, fresh or dry limestone, fresh or dry silicon concrete, reinforced concrete, blocks cement, cement pipes, limestone, brick among others.Diamond: 230mmHole: 22.23mmRPM...

Reference: CORTE0130

Diamond grinding wheel cup type 100xm14

Diamond grinding cup type 100xM14 turbo for angle grinder.Surface roughing is the initial process in surface treatments and finishes. Materials such as natural stones or cement are the most common where this service is performed.To level, prepare, condition, open the pore and many other options, an initial roughing job is necessary.

Reference: CORTE0057

Brand: Pecfix

SDS Plus Stone Drill N 9x160mm C

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0059

Brand: Pecfix

SDS Plus Socket for Stone Nº10x210mm

SDS Plus Fitting Drills for use in electropneumatic hammers for rapid drilling (with percussion) of materials such as stone, concrete, masonry and brick. SDS Plus slot. Rapid penetration of material.MAIN ADVANTAGES✓ Four tungsten carbide tips✓ Four spirals for continuous and rapid removal of dust and debris

Reference: CORTE0098

Drill for iron 2.50mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color. Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 2.5mm

Reference: CORTE0083

Brand: Cofan

Disco Direito para/máquina de cortar mato 3 dentes

Right cutting blade for 3 teeth brushcutter. 3-blade steel blade, ideal for cutting hard grass and shrubs. Suitable for machines with more than 25 DC. Measurements: 230 * 25.4 * 1.4mm.

Reference: CORTE0172

Stainless Disc 115 Box - 10Und

It guarantees maximum stability and work safety, thanks to the precisely manufactured fiberglass net. The CHEMITOOL Stainless Steel Cutting Wheel guarantees great cutting performance, always with maximum safety. Indicated for professional work of fine cutting in stainless steel.

Reference: CORTE0173

Brand: Blofer

Segmented Turbo Blofer Disc General Work 230-H15mm

H15 Disc, Turbo-segmented with 15 mm height. Recommended for cutting all types of building materials. HIGH YIELD.

Reference: CORTE0035

Drill for iron 4.00mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color. Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 4.0mm

Reference: CORTE0033

Drill for iron 3.00mm cobalt

High performance cobalt drill bit. For steel and iron. Bright ocher color. Fully ground drill HSS CO DIN 338N 118º. Cylindrical fitting. Diameter: 3mm

Reference: CORTE0110

Brand: Macfer

Diamond Disc Combi Blade 115 - Macfer

Segmented Diamond Disc combi 115 mm, hole 22.23 mm and RPM / Max = 13,200Ideal for cutting:-concrete;Building bricks;-Mosaic hydraulic;-Stone;-Tile normal;-Tile;

Reference: CORTE0152

Brand: Cofan

Flap Disc 115 G-80

Flap disc 115, grit 80. Disc for professional use in steel and stainless steel, with an aggressive grinding and exceptional durability of the disc. Specially developed for roughing edges. Burr down to the last grain. Main features: - For stainless steel - Ideal for edges - High removal rate - Comfortable deburring

Reference: CORTE0043

Drill for/iron HSS DIN 338 5% Cobalt 1200mm

Fully ground drill, cylindrical insert with amber finish.

Reference: CORTE0087

Saw Blade for Green wood (alternating tooth) - 610mm

High quality tempered steel blade Greater durability | Clean and easy cut Cut green wood. Saw blade with alternate tooth