High stainless steel mirror handle curved handle (pair) int. 4014

Reference: FERR000067

Hinge nº40x2 black

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests .. Dimensions: 5*4.5cm

Reference: FERR000052

Zinc plated stones Nº2 -911

The so-called butterfly lock or bayonet lock, used to close gates, doors, cabinets, drawers ...

Reference: FERR000070

copy of Hinge nº40x3 black

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests . Dimensions: 8.5*7.5cm

Reference: FERR000101

Carabiner for chains T / Frances 80

Nickel-plated French carabiner with 80mm reinforced swivel. Carabiners are used mainly for fixing terminals with cables, chains and ropes. In general, the carabiner is composed of a movable lock, which allows the passage of the cable, chain or rope, providing greater agility in fixing the loads.

Reference: FERR000079

Gate Wheel With Support for V-Welding - 60mm

Reference: FERR000007

Brand: Macfer

Normal Arch Lock 60mm

Brass padlock with normal chrome steel arch and sanded finish, with 3 keys. It has a spring on the lock to facilitate opening the lock.

Reference: FERR000134

Gray Rubber Wheel w/plate 75

75mm gray rubber pulley, has a mounting plate and is intended for the hotel and restaurant sector, furniture, decoration and commercial equipment. Load capacity 45kg. Made from gray rubber and zinc-plated steel. The swivel wheel is made of rigid plastic, it does not scratch or damage the floor, so it can be used on delicate floors without causing any...

Reference: FERR000029E12

Hook 720 lock 12 cm left

Overlay lock model 720 with hook (claw) - LeftModel with type 720 cylinder in polished brass (solid) pin.Box length 12cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Hook tongue on polished brass peg.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000035E

Lock 14cm with 3 keys 720 left

Overlay lock model 720 - LeftModel with type 720 cylinder in polished brass (solid) pin.Box length 14cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000128D12

Large key lock w / 2 keys 101 -12 right

Lock model 101 12 cm rightOld styleIron sheet boxSupplied with two large security keysIndividually wrappedRound iron mirror

Reference: FERR000085

Square foot hinge 40x2 (anchor bolt)

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests .. Dimensions: 6 * 5

Reference: FERR000088

Hinged hinge for cabinets ref 657

Hinged furniture hinge, with spring. It has a nickel-plated brass structure that gives it great durability. Practical and easy to install, adjustment screws. They are recommended for assembling furniture. Total length: 104mm. Total width: 44mm.

Reference: FERR000001

Brand: Macfer

Normal Arch Lock 20mm

Brass padlock with normal chrome steel arch and sanded finish, with 3 keys. It has a spring on the lock to facilitate opening the lock.

Reference: FERR000033D

Lock 10cm w / 3 keys 720 right

Model 720 overlay lock - RightModel with type 720 cylinder in polished brass (solid) pin.Box length 10cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000002

Brand: Macfer

Normal Arch Lock 30mm

Brass padlock with normal chrome steel arch and sanded finish, with 3 keys. It has a spring on the lock to facilitate opening the lock.

Reference: FERR000048

3/8 x 3/4 iron stones locksmith for / welding

Locksmith's clasp, also called rod iron or iron stones. Peders to weld essentially on gates, doors, garages, warehouses…. There are clasps in various sizes! Dimension of this clasp: 15cm

Reference: FERR000072

Stainless Steel Hinge 85 x 2 1/2

Stainless steel hinge, has a reinforced structure that gives it great durability. Practical and easy to install, all stainless steel, removable shaft. They are indicated for theassembly of doors, gates, tables, furniture ... Dimensions: 6 * 1.5cm

Reference: FERR000051

Zinc plated stones Nº1 x 30 tiny

The so-called butterfly lock or bayonet lock, used to close gates, doors, cabinets, drawers ... Dimensions: 3 cm

Reference: FERR000049

3/8 x 1 iron stones for locksmithing / welding

Locksmith's clasp, also called rod iron or iron stones. Peders to weld essentially on gates, doors, garages, warehouses…. There are clasps in various sizes! Dimension of this clasp: 20cm

Reference: FERR000069

Hinge nº40x3 black

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests . Dimensions: 7.3*6.5cm

Reference: FERR000036D10

Large key lock w / 2 keys 101 -10 right

Lock model 101 10 cm rightOld styleIron sheet boxSupplied with two large security keysIndividually wrappedRound iron mirror

Reference: FERR000037E12

1950 mountain lock (1 key) 12 cm left

Lock model 1950 12 cm leftOld styleIron sheet boxSupplied with a large security keyIndividually wrappedRound iron mirror

Reference: FERR000146

Brand: Macfer

Electric lock with right button

Electric lock, with button, right-hand. Adjustable electric latch. Very resistant and safe. Supplied with three keys.

Reference: FERR000145

Brand: Macfer

Electric Lock with Left Button

Electric lock, with button, left. Adjustable electric latch. Very resistant and safe. Supplied with three keys.

Reference: FERR000043

3/8 eye for welding

Used to weld, this eye can also be called by a locksmith hinge or a locksmith eye, 3-body eye, available in several sizes! The anchor bolts areproduced in iron, without galvanic treatment, so that they can be welded to other metallic structures. They are fixed in two points, a fixed point and a movable one (ex: gates, garages ...). They are normally used...

Reference: FERR000110

Forged Shackle M5

The Forged Shackles are indicated for the union between cables and steel chains, or as an anchoring point for tow belts in several situations such as: - 4x4 trailer (Off-Road); - Vehicle towing; - Mooring; - Point of anchorage; - Fixation; - Load lifting; - Industrial, Nautical and Automotive Use; - Safety equipment. Dimension: 5mm.

Reference: FERR000065

Hinge 816x 1 1/2 Zinc plated

Bisagra cuadrada galvanizada, tiene una estructura reforzada que le confiere una gran durabilidad. Prácticas y fáciles de instalar, con sujeción para atornillar, son aptas para montar cancelas, puertas, muebles, mesas ... Dimensiones: 4 * 3.5 cm

Reference: FERR000034D

Lock 12cm w / 3 keys 720 right

Model 720 overlay lock - RightModel with type 720 cylinder in polished brass (solid) pin.Box length 12cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000132

Gray Rubber Wheel with 75 hole

75mm gray rubber wheel, has a single hole. Ideal for the hotel and restaurant sector, furniture, decoration and commercial equipment. Load capacity 45kg. This caster is made of gray rubber and zinc-plated steel. The rotating wheel is made of rigid plastic and does not scratch or damage the floor, so it can be used on delicate floors without causing any...

Reference: FERR000005

Brand: Macfer

Normal Arch Lock 40mm

Brass padlock with normal chrome steel arch and sanded finish, with 3 keys. It has a spring on the lock to facilitate opening the lock.

Reference: FERR000077

Wheel For V Gates - 100mm

Reference: FERR000087

Square foot hinge 40x3 (anchor bolt)

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests .. Dimensions: 8.7* 7.7cm

Reference: FERR000037D12

1950 mountain lock (1 key) 12 cm right

Lock model 1950 12 cm rightOld styleIron sheet boxSupplied with a large security keyIndividually wrappedRound iron mirror

Reference: FERR000003

Brand: Pecfix

Normal Arch Lock 35mm

Brass padlock with normal chrome steel arch and sanded finish, with 3 keys. It has a spring on the lock to facilitate opening the lock.

Reference: FERR000050

Iron stones 4/8 x 1 locksmith for / welding

Locksmith's clasp, also called rod iron or iron stones. Peders to weld essentially on gates, doors, garages, warehouses…. There are clasps in various sizes! Dimension of this clasp: 31 cm

Reference: FERR000042

11x50 eye for welding

Used to weld, this eye can also be called by a locksmith hinge or a locksmith eye, 3-body eye, available in several sizes! The anchor bolts are produced in iron, without galvanic treatment, so that they can be welded to other metallic structures. They are fixed in two points, a fixed point and a movable one (ex: gates, garages ...). They are normally used...

Reference: FERR000135

Pedres Soldar 4/8 x 2 (locksmith lock)

Locksmith's clasp, also called rod iron or iron stones. Peders to weld essentially on gates, doors, garages, warehouses…. There are clasps in various sizes! Dimension of this clasp: 41 cm

Reference: FERR000035D

Lock 14cm w / 3 keys 720 right

Model 720 overlay lock - RightModel with type 720 cylinder in polished brass (solid) pin.Box length 14cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000105

Swivel for / Animals Nº2

Swivel for animals Nº2 (9cm).

Reference: FERR000045

Welding eye 4/8

Used to weld, this eye can also be called by a locksmith hinge or a locksmith eye, 3-body eye, available in several sizes! The anchor bolts areproduced in iron,without galvanic treatment, so that they can be welded to other metallic structures. They are fixed in two points, a fixed point and a movable one (ex: gates, garages ...). They are normally used...

Reference: FERR000109

Forged Shackle M4

The Forged Shackles are indicated for the union between cables and steel chains, or as an anchoring point for tow belts in several situations such as: - 4x4 trailer (Off-Road); - Vehicle towing; - Mooring; - Point of anchorage; - Fixation; - Load lifting; - Industrial, Nautical and Automotive Use; - Safety equipment. Dimension: 4mm.

Reference: FERR000006

Brand: Macfer

Normal Arch Lock 50mm

Brass padlock with normal chrome steel arch and sanded finish, with 3 keys. It has a spring on the lock to facilitate opening the lock.

Reference: FERR000144

Brand: Macfer

Multi-force hydraulic door spring

Multi-force hydraulic closers offer high-performance and versatile solutions for every installation need and ensure easy door opening for the elderly and children. They are an essential device for controlling the movement and closing of doors in commercial and industrial environments. Offering safety, efficiency and comfort, these mechanisms are essential...

Reference: FERR000106

Swivel for / Animals Nº3

Swivel for animals Nº3 (10cm)

Reference: FERR000131

Gray Rubber Wheel with hole and brake 75

75mm gray rubber wheel, with metal brake for through screw. Ideal for hotels, furniture, displays, counters, decoration and commercial equipment. Swivel wheel made of hard rubber and does not scratch or damage the floor, and can be used on delicate floors without causing damage. Supports weights of 36 to 45 kg. Made of gray rubber and galvanized steel,...

Reference: FERR000008

Brand: Macfer

Padlock 40mm High Neck

Brass padlock with high collar in chrome steel and sanded finish, with 3 keys. It has a spring on the lock to facilitate opening the lock.

Reference: FERR000029E14

Hook lock 720 14 cm left

Overlay lock model 720 with hook (claw) - LeftModel with type 720 cylinder in polished brass (solid) pin.Box length 14cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Hook tongue on polished brass peg.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000063

Hinge 816x1 Zinc plated

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests . Dimensions: 8.5*7.5cm

Reference: FERR000061

Zinc plated hinge 816x2 / 2

Bisagra cuadrada galvanizada, tiene una estructura reforzada que le confiere una gran durabilidad. Prácticas y fáciles de instalar, con sujeción para atornillar, son aptas para montar cancelas, puertas, muebles, mesas ... Dimensiones: 6.5 * 5.5 cm

Reference: FERR000082

25mm Nylon Gate Roller

Low-friction, low-wear nylon guide roller is provided on bolts with locking nuts. These high quality gate guide rollers are made of ultraviolet resistant nylon to prevent degradation.

Reference: FERR000080

Gate Wheel With Support for V-Welding - 80mm

Reference: FERR000064

Dobradiça 816x1 1/4 Zincada

Bisagra cuadrada galvanizada, tiene una estructura reforzada que le confiere una gran durabilidad. Prácticas y fáciles de instalar, con sujeción para atornillar, son aptas para montar cancelas, puertas, muebles, mesas ... Dimensiones: 2.5 * 2.0 cm

Reference: FERR000103

Carabiner for chains T / Frances 120

Nickel-plated French carabiner with 120mm reinforced swivel. Carabiners are used mainly for fixing terminals with cables, chains and ropes. In general, the carabiner is composed of a movable lock, which allows the passage of the cable, chain or rope, providing greater agility in fixing the loads.

Reference: FERR000113

M10 Forged Shackle

The Forged Shackles are indicated for the union between cables and steel chains, or as an anchoring point for tow belts in several situations such as: - 4x4 trailer (Off-Road); - Vehicle towing; - Mooring; - Point of anchorage; - Fixation; - Load lifting; - Industrial, Nautical and Automotive Use; - Safety equipment. Dimension: 10mm.

Reference: FERR000053

Zinc plated stones Nº3 -911

The so-called butterfly lock or bayonet lock, used to close gates, doors, cabinets, drawers ... Dimensions: 9 cm

Reference: FERR000023

2.5 electrode box (250 units)

Iron electrodes. Characteristics: - Suitable for welding structural steel. - Excellent for DIY work. - The electrode is suitable for welding in all positions. - Diameter: 2.5mm. - Box of 250 electrodes.

Reference: FERR000030

Lock 727 for aluminum door without barrel

Aluminum door lock, without cylinder.

Reference: FERR000089

Small pulley w/screw and nut Nº9

Steel pulley, metallic Ø42 mm. Includes fixing screw. Suitable for use with cables or stainless steel cable. Ideal for drying racks.

Reference: FERR000029D14

Hook lock 720 14 cm right

Overlay lock model 720 with hook (claw) - RightModel with type 720 cylinder in polished brass (solid) pin.Box length 14cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Hook tongue on polished brass peg.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000032D

Lock 8cm w / 3 keys 720 right

Model 720 overlay lock - RightModel with type 720 cylinder in polished brass (solid) pin.Box length 8cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000108

Swivel for / Animals Nº5

Swivel for animals Nº5 (15cm).

Reference: FERR000068

copy of Hinge nº40x2 black

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests .. Dimensions: 6* 5.5cm

Reference: FERR000081

Gate Wheel With Support for V-Welding - 100mm

Reference: FERR000102

Carabiner for chains T / Frances 100

Nickel-plated French carabiner with 100mm reinforced swivel. Carabiners are used mainly for fixing terminals with cables, chains and ropes. In general, the carabiner is composed of a movable lock, which allows the passage of the cable, chain or rope, providing greater agility in fixing the loads.

Reference: FERR000046

Welding eye 5/8

Used to weld, this eye can also be called by a locksmith hinge or a locksmith eye, 3-body eye, available in several sizes! The anchor bolts areproduced in iron,without galvanictreatment, so that they can be welded to other metallic structures. They are fixed in two points, a fixed point and a movable one (ex: gates, garages ...). They are normally used to...

Reference: FERR000024

Canhão for/portal aluminum 60mm - 3 keys

Canhão for door date stamping, for common accesses. Single cylinder timing and double entry, possui 6 consecutive pins with medium protection against withdrawal. Aluminum case with satin nickel finish. Includes: 3 nickel-plated keys and assembly shield. Dimensions: 6X1X1.5cm.

Reference: FERR000025

Canhão for aluminum security door 5 keys

Canhão for dating aluminum door, security (anti-theft). Date of security cylinder with double entry, after 7 consecutive pins with media protection against withdrawal. Aluminum case with satin nickel finish. Includes: 5 nickel-plated keys and assembly parafuser. Dimensions: 6X1X1.5cm.

Reference: FERR000075

Wheel For V Gates - 60mm

Reference: FERR000056

Zinc plated 4x8x1 stones

The so-called butterfly lock or bayonet lock, used to close gates, doors, cabinets, drawers ... Dimensions: 22 cm

Reference: FERR000112

Forged Shackle M8

The Forged Shackles are indicated for the union between cables and steel chains, or as an anchoring point for tow belts in several situations such as: - 4x4 trailer (Off-Road); - Vehicle towing; - Mooring; - Point of anchorage; - Fixation; - Load lifting; - Industrial, Nautical and Automotive Use; - Safety equipment. Dimension: 8mm.

Reference: FERR000032E

8cm lock with 3 keys 720 left

Overlay lock model 720 - LeftModel with type 720 cylinder in polished brass (solid) pin.Box length 8cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000126

Hinge nº40x1 1/2 black

Bisagra cuadrada de hierro, tiene una estructura reforzada que le confiere una gran durabilidad. Prácticas y fáciles de instalar, con sujeción para atornillar, son aptas para montar cancelas, puertas, muebles, mesas ... Dimensions: 3.7* 3.7cm

Reference: FERR000114

M12 Forged Shackle

The Forged Shackles are indicated for the union between cables and steel chains, or as an anchoring point for tow belts in several situations such as: - 4x4 trailer (Off-Road); - Vehicle towing; - Mooring; - Point of anchorage; - Fixation; - Load lifting; - Industrial, Nautical and Automotive Use; - Safety equipment. Dimension: 12mm.

Reference: FERR000033E

Lock 10cm w / 3 keys 720 left

Overlay lock model 720 - LeftModel with type 720 cylinder in polished brass (solid) pin.Box length 10cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000047

Iron stones 5 / 16x3 locksmith for / welding

Locksmith's clasp, also called rod iron or iron stones. Peders to weld essentially on gates, doors, garages, warehouses…. There are clasps in various sizes! Dimension of this clasp: 9cm

Reference: FERR000107

Swivel for / Animals Nº4

Swivel for animals Nº4 (12cm).

Reference: FERR000128E12

Large key lock w / 2 keys 101 -12 left

Lock model 101 of 12 cm leftOld styleIron sheet boxSupplied with two large security keysIndividually wrappedRound iron mirror

Reference: FERR000044

Welding eye 5/16

Used to weld, this eye can also be called by a locksmith hinge or a locksmith eye, 3-body eye, available in several sizes! The anchor bolts are produced in iron, without galvanic treatment, so that they can be welded to other metallic structures. They are fixed in two points, a fixed point and a movable one (ex: gates, garages ...). They are normally used...

Reference: FERR000076

Wheel For V Gates - 80mm

Reference: FERR000083

30mm Nylon Gate Roller

Low-friction, low-wear nylon guide roller is provided on bolts with locking nuts. These high quality gate guide rollers are made of ultraviolet resistant nylon to prevent degradation.

Reference: FERR000055

Zinc plated stones 3 / 8x3 / 4

The so-called butterfly lock or bayonet lock, used to close gates, doors, cabinets, drawers ... Dimensions: 17 cm

Reference: FERR000091

Large sheave with 60mm aluminum hook

Aluminum cast with hook, 60mm (diameter) Used to facilitate the maneuver of lifting volumes and lifting weights with a rope, rope or current, ideal for building a stent.

Reference: FERR000073

85 x 3 Stainless Steel Hinge

Stainless steel hinge, has a reinforced structure that gives it great durability. Practical and easy to install, all stainless steel, removable shaft. They are indicated for theassembly of doors, gates, tables, furniture ... Dimensions: 7.5 * 2cm

Reference: FERR000086

Square foot hinge 2/1/2 (anchor bolt)

Square foot iron hinge, with screw fastening, used in months, doors, furniture, chests .. Dimensions: 7* 6cm

Reference: FERR000100

Carabiner for chains T / Frances 60

Nickel-plated French carabiner with 60mm reinforced swivel. Carabiners are used mainly for fixing terminals with cables, chains and ropes. In general, the carabiner is composed of a movable lock, which allows the passage of the cable, chain or rope, providing greater agility in fixing the loads.

Reference: FERR000054

Zinc plated stones 3 / 8x1 / 2

The so-called butterfly lock or bayonet lock, used to close gates, doors, cabinets, drawers ... Dimensions: 11 cm

Reference: FERR000074

85 x 2 Stainless Steel Hinge

Stainless steel hinge, has a reinforced structure that gives it great durability. Practical and easy to install, all stainless steel, removable shaft. They are indicated for the assembly of doors, gates, tables, furniture ... Dimensions: 5 * 1.5cm

Reference: FERR000133

Gray Rubber Wheel with plate and brake 75

75mm gray rubber wheel, with swivel plate and metal brake. Ideal for hotels, furniture, displays, counters, decoration, drying racks and commercial equipment. Wheel suitable for industrial and domestic use. This swivel wheels are made of hard rubber, gray in color and zinc-plated steel, so it will not scratch or damage the floor. It can be used on...

Reference: FERR000036E10

Large key lock w / 2 keys 101 -10 left

Lock model 101 of 10 cm leftOld styleIron sheet boxSupplied with two large security keysIndividually wrappedRound iron mirror

Reference: FERR000136

727 Lock for aluminum door without GNS barrel

727 mortise lock for aluminum doors, stainless steel front, with cylinder entry, without cylinder.

Reference: FERR000034E

Lock 12cm w / 3 keys 720 left

Overlay lock model 720 - LeftModel with type 720 cylinder in polished brass (solid) pin.Box length 12cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Polished brass pin and tongue.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).

Reference: FERR000029D12

720 Hook Lock 12cm Right

Overlay lock model 720 with hook (claw) - RightModel with type 720 cylinder in polished brass (solid) pin.Box length 12cmBox height 8.5cmCylinder length 40cm.Iron sheet box.Hook tongue on polished brass peg.Supplied with three brass keys (2.2 mm thickness).Painted iron box (1.5mm).