Hidromatic 220v (10Bar) ESP-16

Applications: Automation of starting and stopping electric pumps up to 2HP. Attention: Max. not adjustable, depends exclusively on the electric pump used. Operation: The electric pump starts after opening a tap (pressure drop) and stops a few seconds after closing it (no flow). Features: Protection against water shortage with automatic reset. • Starting pressure adjustable between 1.5 and 3 bar (factory setting 1.5 bar). • Vertical installation according to the direction of the water flow. • Maximum allowable current: 10A. • Max. permissible: 10 bar. • IP65 • Temp. max. environment: 60 ºC. • 0-10 bar pressure gauge. • Max. Flow 10,000 L / h. Starting pressure adjustment: The starting pressure must be set 0.2 bar above the pressure exerted by the installation's water column on the PC13A. • The factory setting of 1.5 bar is sufficient in most cases. • Changing the starting pressure is recommended when the tap is more than 13 m (max. 28 m) high.