Self-piercing Screw 6.3x120 C / Seal Washer (A18)

Reference: PARAF00189

Zinc plated steel nail 3.50x65 (box 250 units)

3.5x65 grooved galvanized steel nails.Produced with medium carbon steel wire (average 0.65%).Hardness: 50-55 HRC.Resistance: 700/800 N / mm2Finish: Electrolytic Zinc PlatedStandard: EN 10230-1Steel nail is widely used in the construction sector.Of manual use, using a hammer, the high resistance of the wire used in its manufacture, allows fixing on hard...

Reference: PARAF00324

Bushing FOR / Clamp Buckle PCL 7001 (black) - Unit

Specially designed to be used in combination with cable ties, made of polyamide to fix cables and hoses on masonry surfaces. Made of polyamide (PA 6.6) and resistant to UV rays. Nylon (Polyamide - PA 6.6); Cable assembly - with buckle clamp; Impact and weather resistant. Pack of 1 unit!

Reference: PARAF00046

Steel Bushing with Stop M10x90

Steel bushing with stop, used for high loads. The bushing is a fully threaded, torque-controlled expansion anchor designed for consistent performance in cracked and non-cracked concrete. The anchor is easy to install and suitable for a variety of base materials with a nominal drill size identical to the diameter of the anchor

Reference: PARAF00249

Rivet Wide Flap 5x16

The rivet is a metallic, semi-permanent mechanical fastener. Before its installation, it consists of a cylinder with a head at one end, similar to a nail or pin. Its installation is made in a pre-drilled hole, through the flattening (deformation by blows) of the tip, when the spike fills the hole, holding the rivet, expanding up to 1.5 times its original...

Reference: PARAF00219

Hexagon Nut 5/32

The hex nut is used to assist in fixing different types of screws, threaded bars and even metal rods.It must be compatible with the size of your screw so that the fit is perfect and does not become too loose, ensuring a good result.

Reference: PARAF00002

Scapula 3.5x50

The scapula basically serves to allow you to hang a series of things on different surfaces in the house, whether internal or external.Its structure is a mixture of a threaded body with an “L” hook on the outside part after installation. Thus allowing to easily fit decorative objects (such as sculptures and paintings), lighting, tools and other elements.

Reference: PARAF00138

Washer M.6

Washer M6.

Reference: PARAF00195

Bichromated Steel Screw 5x35

Bichromated wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.

Reference: PARAF00314

Bolt Steel Zinc Plated 1 1 / 2x10 - Emb 100und

Self-tapping zinc plated screw.The screw is an essential fastening element for joining two elements non-permanently, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00168

Hexagon Nut M8

Hexagon nut M8 stainless steel. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees); -Resistance to...

Reference: PARAF00117

Screw Bichromated steel 6x80 cx. 100 units

Screw in chipboard steel (wooden thread), bichromated. It is an essential fastening element for joining two elements in a non-permanent way, adapted to fit tools such as cross or screwdrivers. It can be used in various products from cars, wood to household appliances, among others... It is made with firm materials, which allows it to have excellent...

Reference: DROG00224

Staple for Wood / Nets - KG

Galvanized clamps for fixing wires or nets to wooden posts.Ex: Treated pineBox contains 1 kg.

Reference: PARAF00165

Hexagonal stainless steel screw M8x90

Hexagonal stainless steel screw m8x90. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees);...

Reference: PARAF00162

Parafuso inox autoperfurante 3,5x19

Reference: PARAF00042

Metal Bushing with M8x80 screw

The metallic bushing in galvanized steel, allows an easy and quick assembly in most solid and hollow substrates used in civil construction. Recommended for fragile materials, such as brick. The special shape of the chuck allows for rapid expansion and the grooves near the end of the chuck ensure a better grip capacity inside the hole. The polyamide inner...

Reference: PARAF00126

Crimps cables to / steel cable 10

Product for tightening thin steel cables with or without coating. Adjustable and reversible.

Reference: PARAF00250

Rivet Pop Aluminum 3x10

The rivet is a metallic, semi-permanent mechanical fastener. Before its installation, it consists of a cylinder with a head at one end, similar to a nail or pin. Its installation is made in a pre-drilled hole, through the flattening (deformation by blows) of the tip, when the spike fills the hole, holding the rivet, expanding up to 1.5 times its original...

Reference: PARAF00013

Hexagon screw M10x50

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00268

Oval head screw 3 / 16x1 1/4

Oval head screw 3 / 16x1 ¼. The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers. It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability. The...

Reference: PARAF00220

Hexagon Nut M5

The hex nut is used to assist in fixing different types of screws, threaded bars and even metal rods.It must be compatible with the size of your screw so that the fit is perfect and does not become too loose, ensuring a good result.

Reference: PARAF00143

Washer M.8 Wide brim

Washer M.8 Wide flap.

Reference: PARAF00272

10mm Green Nylon Hood (for self-tapping)

Cover in green, for hexagonal head screws. It is a versatile and functional piece, designed to provide finishing and protection in various applications. Made from high quality nylon, it offers resistance and durability, ensuring effectiveness even in adverse conditions. Dimensions: 10mm Sold individually.

Reference: PARAF00247

Zinc plated screw 3x25

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00083

Screw tirefond 7x 120

Hexagon head tirefond screw.The tirefond screw is the ideal solution for screwing with machines.Widely used for sandwich plate application.

Reference: PARAF00059

Brand: Pecfix

Extreme One PCL518 6mm Universal Bushings - Pecfix

Reference: PARAF00081

Screw tirefond 7x 80

Hexagon head tirefond screw.The tirefond screw is the ideal solution for screwing with machines.Widely used for sandwich plate application.

Reference: PARAF00019

Hexagon Nut M10

The hex nut is used to assist in fixing different types of screws, threaded bars and even metal rods.It must be compatible with the size of your screw so that the fit is perfect and does not become too loose, ensuring a good result.

Reference: PARAF00163

Umbrian stainless steel fender M8 x 16

Stainless steel screw, umbrako oval head. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees);...

Reference: PARAF00313

Bolt Steel Zinc plated 1x10 - Emb 100und

Self-tapping zinc plated screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and...

Reference: PARAF00242

5x80 Zinc Plated Screw

Galvanized screw with partial thread.The screw is an essential fastening element for joining two elements non-permanently, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The...

Reference: PARAF00238

Bichromatic cross screw 3.5x20

Bichromated wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.

Reference: PARAF00257

Washer M10

Washer M10.

Reference: PARAF00300

Brand: Pecol

Metalic Bushing Segmented PCL753 M16x170mm - Pecol

The PCL 753 bushing is produced in galvanized steel. This bushing is composed of a threaded bolt and a three-segment expansion clip that allows an effective fixation on solid materials (concrete, natural stone). The pre-assembled nut and washer DIN 125 allow for quick installation. Its shape helps with expansion and prevents rotation of the bushing when...

Reference: PARAF00096

6.3x50 self-drilling screw

The self-drilling screw is the ideal solution for screwing with machines.

Reference: PARAF00025

B12 welded bichromated steel python

Bichromated welded steel stud or ring screw as it is also known, it is ideal for using cable and rope ropes. They are basically used to fix elements and / or support points. It can be your choice to support hanging plant pots, garden hammocks, ceiling racks, fixed rails and other multiple uses. It is very important to always pay attention to your weight...

Reference: PARAF00027

M6 x 65 shrimp with metallic bushing

The shrimp with metallic bushing is basically used to fix elements and / or support points. It can be your choice to support hanging plant pots, garden nets, ceiling racks, fixed racks, among other multiple uses. It is very important to always pay attention to your weight capacity.

Reference: PARAF00099

Brand: Pecol

Self-piercing Screw 6.3x60 C / Washer Seal (A18)

Reference: PARAF00100

Brand: Pecol

Self-piercing Screw 6.3x76 C / Seal Washer (A18)

Reference: PARAF00234

Bichromatic cross screw 6x60

Bichromated wood / chipboard “cheese head” screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength...

Reference: PARAF00231

4x20 rivet

The rivet is a metallic, semi-permanent mechanical fastener. Before its installation, it consists of a cylinder with a head at one end, similar to a nail or pin. Its installation is made in a pre-drilled hole, through the flattening (deformation by blows) of the tip, when the spike fills the hole, holding the rivet, expanding up to 1.5 times its original...

Reference: PARAF00085

Screw tirefond 8x 120

Hexagon head tirefond screw.The tirefond screw is the ideal solution for screwing with machines.Widely used for sandwich plate application.

Reference: PARAF00146

Spring washer Din127 Steel M6 (pressure)

Spring washer Din127 Steel M6 (pressure).

Reference: PARAF00228

Screw 1/1 / 2x8

Galvanized screw with partial thread, flat head. The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers. It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent...

Reference: PARAF00105

Red Nylon Cap 10mm (for autorroscnt)

Red nylon cover for hexagon head screws. Dimensions: 10mm

Reference: PARAF00093

6.3x20 self-drilling screw

The self-drilling screw is the ideal solution for screwing with machines.

Reference: PARAF00123

Wire cables for M 5 3/16 steel cable

Product for tightening thin steel cables with or without coating. Adjustable and reversible.

Reference: PARAF00222

Hexagon screw M12x80

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00244

1/1 / 2x10 Zinc Plated Screw

Self-tapping zinc plated screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and...

Reference: PARAF00016

Hexagon screw M12x40

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00022

M6 steel stud

Steel stud or ring bolt as it is also known, is ideal for use in passing cables and ropes. They are basically used to fix elements and / or support points. It can be your choice to support hanging plant pots, garden hammocks, ceiling racks, fixed rails and other multiple uses. It is very important to always pay attention to your weight capacity.

Reference: PARAF00164

Umbrako M8 x 70 stainless steel screw

Stainless steel screw, umbrako oval head. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees);...

Reference: PARAF00021

Hexagon Nut M14

The hex nut is used to assist in fixing different types of screws, threaded bars and even metal rods.It must be compatible with the size of your screw so that the fit is perfect and does not become too loose, ensuring a good result.

Reference: PARAF00271

Shrimp M6

The shrimp basically used to fix elements and / or support points. It can be your choice to support hanging plant pots, garden nets, ceiling racks, fixed racks, among other multiple uses. It is very important to always pay attention to your weight capacity.

Reference: PARAF00290

Self-piercing Screw 6.3x60 C / Washer Sealing (A18) - 250units

Box with 250 units.

Reference: PARAF00035

Shrimp 6x50-3,5x50 R / wood

The shrimp basically serves to allow you to hang a series of things on different surfaces in the house, whether internal or external.Its structure is a mixture of a threaded body with a hook on the part that remains outside after installation. Thus allowing to easily fit decorative objects (such as sculptures and paintings), lighting, tools and other...

Reference: PARAF00170

Stainless steel washer M10 (A2)

M10 stainless steel washer. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees); -Resistance to sudden...

Reference: PARAF00033

Shrimp 4x36-2,5x36 R / wood

The shrimp basically serves to allow you to hang a series of things on different surfaces in the house, whether internal or external.Its structure is a mixture of a threaded body with a hook on the part that remains outside after installation. Thus allowing to easily fit decorative objects (such as sculptures and paintings), lighting, tools and other...

Reference: PARAF00048

Black bushing nº6

High quality black polypropylene tong bushing, suitable for solid materials, and suitable for light loads Main features: -Expansion of the total surface along the length of the bushing; -The bushing body guarantees the self-centering of the screw during its tightening; -Resists high tensile loads on solid and hollow substrates; -Protects the screw against...

Reference: PARAF00196

Nylon Hood Orange tile 10mm (for autoroscnt)

Cover in tile orange, for hexagonal head screws. It is a versatile and functional piece, designed to provide finishing and protection in various applications. Made from high quality nylon, it offers resistance and durability, ensuring effectiveness even in adverse conditions. Dimensions: 10mm Sold individually.

Reference: PARAF00012

Hexagon screw M10x40

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00010

Hexagon screw M8x55

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00279

Nylon bushing without rim 7x30

Bushing for solid materials, ideal for the application of medium and light loads. Produced in high quality polyamide. Its shape prevents rotation in the hole and guarantees a great precision and efficiency in the fixation. Uniform expansion due to its conical shape that guarantees the self-centering of the screw when it is applied to the bushing. Suitable...

Reference: PARAF00080

Screw tirefond 6x 120

Hexagon head tirefond screw.The tirefond screw is the ideal solution for screwing with machines.Widely used for sandwich plate application.

Reference: PARAF00237

Bichromatic cross screw 3.5x30

Bichromated wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.

Reference: PARAF00230

Bichromatic cross screw 4x50

Bichromated wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.

Reference: PARAF00171

Hexagon Nut M10

Hexagon nut M10 stainless steel. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees); -Resistance to...

Reference: PARAF00211

Nylon bushing without rim Nº8x40

Bushing for solid materials, ideal for the application of medium and light loads. Produced in high quality polyamide. Its shape prevents rotation in the hole and guarantees a great precision and efficiency in the fixation. Uniform expansion due to its conical shape that guarantees the self-centering of the screw when it is applied to the bushing. Suitable...

Reference: PARAF00043

Metal Bushing with M10x100 screw

The brass bushing allows easy and quick assembly. Recommended for heavy and semi-heavy loads, such as concrete and natural stone. The special shape of the chuck allows for rapid expansion and the grooves near the end of the chuck ensure a better grip capacity inside the hole. The polyamide inner ring prevents rotation of the bushing during tightening....

Reference: PARAF00145

Ring M.12 Wide brim

Washer M.12 Wide flap.

Reference: PARAF003027

Steel nail 3x60 (bag 100und)

Made of steel, it is the ideal nail for fixing in wet areas or with seaweed, as it does not rust.Widely used in the construction of houses and construction of structures, carpentry and heavy construction.Sale in individual bag of 100 units.

Reference: PARAF00312

Screw Steel Zinc plated 1x10 Box 500und

Self-tapping zinc plated screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and...

Reference: PARAF00018

Hexagon Nut M8

The hex nut is used to assist in fixing different types of screws, threaded bars and even metal rods.It must be compatible with the size of your screw so that the fit is perfect and does not become too loose, ensuring a good result.

Reference: PARAF00239

M40x40 bichromated cross screw

Bichromated wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.

Reference: PARAF00142

Washer M.6 Wide brim

Washer M.6 Wide flap.

Reference: PARAF00206

6.3x18mm rubber plate washer

The EPDM washer is a sealing washer suitable for roofs and facades, normally used in self-drilling screws for plate application.

Reference: PARAF00166

Umbrako M8 x 100 stainless steel screw

Stainless steel screw, umbrako oval head. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees);...

Reference: PARAF00340

Nylon Hood Sxt PCL502 Brown R8004 10mm - Unit

Brown cover for hexagonal head screws. It is a versatile and functional piece, designed to provide finishing and protection in various applications. Made from high quality nylon, it offers resistance and durability, ensuring effectiveness even in adverse conditions. Dimensions: 10mm Sold individually.

Reference: PARAF00095

Self-drilling screw 6.3x40

The self-drilling screw is the ideal solution for screwing with machines.

Reference: PARAF00159

1 / 2x6 Stainless Screw

Stainless steel screw. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees); -Resistance to sudden...

Reference: PARAF00302

Bichromated Cross Screw M6x100 - Box of 100 units

Screw in chipboard steel (wooden thread), bichromated. It is an essential fastening element for joining two elements in a non-permanent way, adapted to fit tools such as cross or screwdrivers. It can be used in various products from cars, wood to household appliances, among others... It is made with firm materials, which allows it to have excellent...

Reference: PARAF00004

Scapula 4,5x70

The scapula basically serves to allow you to hang a series of things on different surfaces in the house, whether internal or external.Its structure is a mixture of a threaded body with an “L” hook on the outside part after installation. Thus allowing to easily fit decorative objects (such as sculptures and paintings), lighting, tools and other elements.

Reference: PARAF00323

copy of Bushing FOR / Clamp Buckle PCL 7001 (black) - 100 units

Specially designed to be used in combination with cable ties, made of polyamide to fix cables and hoses on masonry surfaces. Made of polyamide (PA 6.6) and resistant to UV rays. Nylon (Polyamide - PA 6.6); Cable assembly - with buckle clamp; Impact and weather resistant. Pack of 100 units!

Reference: PARAF00086

Self-drilling screw (cheese head) 3 / 4x7

Self-drilling cheese head screw.The self-drilling screw is the ideal solution for screwing with machines.Very used for gutters.

Reference: PARAF00044

Steel Bushing With Stop M6x60

Steel bushing with stop, used for high loads. The bushing is a fully threaded, torque-controlled expansion anchor designed for consistent performance in cracked and non-cracked concrete. The anchor is easy to install and suitable for a variety of base materials with a nominal drill size identical to the diameter of the anchor

Reference: PARAF00150

Screw M6x25

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00001

Scapula 2.5x32

The scapula basically serves to allow you to hang a series of things on different surfaces in the house, whether internal or external.Its structure is a mixture of a threaded body with an “L” hook on the outside part after installation. Thus allowing to easily fit decorative objects (such as sculptures and paintings), lighting, tools and other elements.

Reference: PARAF00216

M8x0 bushing with edge

Universal bushing for solid and hollow building materials. Produced in high density polyethylene, ideal for the application of medium and light loads. The bushing body is divided into three parts and allows for expansion in solid materials (eg cement) and hollow materials (eg plasterboard). Allows application in all types of construction materials. The...

Reference: PARAF00245

3x10 Zinc Plated Screw

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00233

Bichromatic cross screw 5x60

Bichromated wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.

Reference: PARAF00045

Steel Bushing With Stop M8x50

Bichromated steel bushing with stop, used for high loads. The bushing is a fully threaded, torque-controlled expansion anchor designed for consistent performance in cracked and non-cracked concrete. The anchor is easy to install and suitable for various base materials with a nominal drill size identical to the diameter of the anchor.

Reference: PARAF00167

Stainless steel washer M8 (A2)

M8 stainless steel washer. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees); -Resistance to sudden...

Reference: PARAF00304

Screw Steel Zinc plated 3x16 - Emb. 100und

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00139

Washer M.8

Washer M8.

Reference: PARAF00158

Small Stainless Steel 3 / 8x6 Screw

Stainless steel screw. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees); -Resistance to sudden...

Reference: PARAF00223

Hexagon screw M8x90

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00039

M10 Steel Bushing

The metal bushing is recommended for fastening medium and light loads. Ideal for static load applications in solid materials. This bushing is composed of a pre-assembled internal nut and four segments that ensure an efficient fixation in all types of holes, even in oversized holes. -Anti rotation during installation; -Body with anti-corrosion...

Reference: PARAF00028

Shrimp M8

The shrimp basically used to fix elements and / or support points. It can be your choice to support hanging plant pots, garden nets, ceiling racks, fixed racks, among other multiple uses. It is very important to always pay attention to your weight capacity.

Reference: PARAF00101

Brand: Pecol

Self-piercing Screw 6.3x90 C / Washer Seal (A18)

Reference: PARAF00050

Black bushing nº10

High quality black polypropylene tong bushing, suitable for solid materials, and suitable for light loads Main features: -Expansion of the total surface along the length of the bushing; -The bushing body guarantees the self-centering of the screw during its tightening; -Resists high tensile loads on solid and hollow substrates; -Protects the screw against...

Reference: PARAF00061

Brand: Pecfix

Extreme One Universal PCL518 8mm Bushings - Pecfix

Reference: PARAF00190

Zinc plated steel nail 3.50x65 (bag contains 50 nails)

3.5x65 grooved galvanized steel nails.Produced with medium carbon steel wire (average 0.65%).Hardness: 50-55 HRC.Resistance: 700/800 N / mm2Finish: Electrolytic Zinc PlatedStandard: EN 10230-1Steel nail is widely used in the construction sector.Of manual use, using a hammer, the high resistance of the wire used in its manufacture, allows fixing on hard...

Reference: PARAF00303

Bolt Steel Zinc plated 3x10 - Emb. 100und

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00006

Hexagon screw M6x50

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00140

Ring M.12

Washer M12.

Reference: PARAF00266

Hexagon screw M8x20

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00306

Bolt Steel Zinc plated 3x25 Box 1000und

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00092

Self-drilling screw Steel Zn 4.8x19

The self-drilling screw is the ideal solution for screwing with machines.

Reference: PARAF00187

Zinc plated steel nail 3.50x45 (box 250 units)

3.5x45 grooved galvanized steel nails.Produced with medium carbon steel wire (average 0.65%).Hardness: 50-55 HRC.Resistance: 700/800 N / mm2Finish: Electrolytic Zinc PlatedStandard: EN 10230-1Steel nail is widely used in the construction sector.Of manual use, using a hammer, the high resistance of the wire used in its manufacture, allows fixing on hard...

Reference: PARAF00011

Hexagon bolt M8x10

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00114

Screw Steel Zinc plated 5x60 cx. 250uni

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00188

Zinc plated steel nail 3.50x45 (bag contains 50 nails)

3.5x45 grooved galvanized steel nails.Produced with medium carbon steel wire (average 0.65%).Hardness: 50-55 HRC.Resistance: 700/800 N / mm2Finish: Electrolytic Zinc PlatedStandard: EN 10230-1Steel nail is widely used in the construction sector.Of manual use, using a hammer, the high resistance of the wire used in its manufacture, allows fixing on hard...

Reference: PARAF00136

Washer M.4

Washer M4.

Reference: PARAF00029

Shrimp M10

Bichromated shrimp is basically used to fix elements and / or support points. It can be your choice to support hanging plant pots, garden nets, ceiling racks, fixed racks, among other multiple uses. It is very important to always pay attention to your weight capacity.

Reference: PARAF00236

Bichromatic cross screw 3.0x25

Bichromated wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.

Reference: PARAF00283

Screw Steel Zinc plated 1x10

Self-tapping zinc plated screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and...

Reference: PARAF00253

Zinc plated screw 3 / 16x1 / 2

It has a zinc plated finish, providing greater resistance against oxidation / corrosion. It has a flat / conical head that offers a close-to-surface finish, which allows for an elegant and discreet design. The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers. It...

Reference: PARAF00040

M12 Steel Bushing

The metal bushing is recommended for fastening medium and light loads. Ideal for static load applications in solid materials. This bushing is composed of a pre-assembled internal nut and four segments that ensure an efficient fixation in all types of holes, even in oversized holes. -Anti rotation during installation; -Body with anti-corrosion...

Reference: PARAF00144

Ring M.10 Wide brim

Washer M.10 Wide flap.

Reference: PARAF00017

Hexagon Nut M6

The hex nut is used to assist in fixing different types of screws, threaded bars and even metal rods.It must be compatible with the size of your screw so that the fit is perfect and does not become too loose, ensuring a good result.

Reference: PARAF00032

Camarão 5x55-3x55 R / madeira

The shrimp basically serves to allow you to hang a series of things on different surfaces in the house, whether internal or external.Its structure is a mixture of a threaded body with a hook on the part that remains outside after installation. Thus allowing to easily fit decorative objects (such as sculptures and paintings), lighting, tools and other...

Reference: PARAF00104

10mm white Nylon hood (for self-tapping)

White cover, for hexagonal head screws. It is a versatile and functional piece, designed to provide finishing and protection in various applications. Made from high quality nylon, it offers resistance and durability, ensuring effectiveness even in adverse conditions. Dimensions: 10mm Sold individually.

Reference: PARAF00213

Nylon bushing without rim Nº12

Bushing for solid materials, ideal for the application of medium and light loads. Produced in high quality polyamide. Its shape prevents rotation in the hole and guarantees a great precision and efficiency in the fixation. Uniform expansion due to its conical shape that guarantees the self-centering of the screw when it is applied to the bushing. Suitable...

Reference: PARAF00286

Self-drilling screw 5.5x50 (shallow head)

Flat head self-drilling screw.The self-drilling screw is the ideal solution for screwing with machines.Very used for gutters.

Reference: PARAF00316

Screw Steel Zinc plated 5x80 - Emb 100und

Galvanized screw with partial thread.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and...

Reference: PARAF00063

10x38 plasterboard anchor

Plasterboard anchor, or butterfly anchor as it is also known, is produced in polyamide, specially designed for fixing light loads on thin plaster walls, plasterboard and hollow materials. Single size anchor that allows the fixing of panels of different thickness, from 12mm. With anti-rotation system that facilitates installation.

Reference: PARAF00120

1/1 / 4x8 Steel Zinc Screw 1000uni

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00248

3.5x30 Zinc Plated Screw

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00088

Self-drilling screw 3 / 4x8 (flat head)

Flat head self-drilling screw.The self-drilling screw is the ideal solution for screwing with machines.Very used for gutters.

Reference: PARAF00014

Hexagon screw M10x70

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00007

Hexagon screw M6x70

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00119

Bichromated Steel Screw 6x60 cx. 250 units

Chipboard steel screw (wooden thread). Bichromated. Diameter: 6x60 Quantity: 250 units

Reference: PARAF00232

6x80 Zinc Plated Screw

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00285

Hexagon Nut Stainless M6

Hexagon nut M6 stainless steel. Main features: -High corrosion resistance; - Adequate mechanical resistance; -Easy to clean; -Low surface roughness; -Hygienic appearance; -Inert material, it doesn't smell or taste; -Ease of conformation and joining; -Resistance to high temperatures; -Resistance to cryogenic temperature (below 0 degrees); -Resistance to...

Reference: PARAF00252

Stop for / windows

Round plastic shutter stop. Special for blinds. Available in brown and white, depending on existing stock.

Reference: PARAF00109

Bolt Steel Zinc plated 3x10 cx. 1000uni

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00240

3.5x35 Zinc Plated Screw

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00270

Phosphated screw for plasterboard 3.9 x35

Phosphated self-tapping screw and antioxidant protection for fixing plasterboard or plasterboard on metal profiles. Optimized angle thread that facilitates screw insertion. Sharp point that directly pierces the profile for plasterboard.

Reference: PARAF00207

Rubber plate washer 4.8x0 mm

The EPDM washer is a sealing washer suitable for roofs and facades, normally used in self-drilling screws for plate application.

Reference: PARAF00152

Hexagon Screw M6x90

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00009

Hexagon screw M8x80

Hexagon head screw metric and total thread.The hex bolt is one of the most common fasteners when it comes to construction and repair. Its name is due to its 6-sided head.It can be used in a multitude of applications, both internal and external.

Reference: PARAF00246

3x16 Zinc Plated Screw

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00133

Screw 5.0x60 Zinc plated

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00041

Metal Bushing with M6x60 screw

The metallic bushing in galvanized steel, allows an easy and quick assembly in most solid and hollow substrates used in civil construction. Recommended for fragile materials, such as brick. The special shape of the chuck allows for rapid expansion and the grooves near the end of the chuck ensure a better grip capacity inside the hole. The polyamide inner...

Reference: PARAF00212

M10x50 bushing

Bushing for solid materials, ideal for the application of medium and light loads. Produced in high quality polyamide. Its shape prevents rotation in the hole and guarantees a great precision and efficiency in the fixation. Uniform expansion due to its conical shape that guarantees the self-centering of the screw when it is applied to the bushing. Suitable...

Reference: PARAF00129

4x16 rivet

The rivet is a metallic, semi-permanent mechanical fastener. Before its installation, it consists of a cylinder with a head at one end, similar to a nail or pin. Its installation is made in a pre-drilled hole, through the flattening (deformation by blows) of the tip, when the spike fills the hole, holding the rivet, expanding up to 1.5 times its original...

Reference: PARAF00084

Screw tirefond 8x 100

Hexagon head tirefond screw.The tirefond screw is the ideal solution for screwing with machines.Widely used for sandwich plate application.

Reference: PARAF00047

Steel bushing with M12x110 stop

Steel bushing with stop, used for high loads. The bushing is a fully threaded, torque-controlled expansion anchor designed for consistent performance in cracked and non-cracked concrete. The anchor is easy to install and suitable for a variety of base materials with a nominal drill size identical to the diameter of the anchor

Reference: PARAF00037

Metal Bushing Steel M6

The metal bushing is recommended for fastening medium and light loads. Ideal for static load applications in solid materials. This bushing is composed of a pre-assembled internal nut and four segments that ensure an efficient fixation in all types of holes, even in oversized holes. -Anti rotation during installation; -Body with anti-corrosion...

Reference: PARAF003026

Steel nail 3x50 (bag 100 units)

Made of steel, it is the ideal nail for fixing in wet areas or with seaweed, as it does not rust.Widely used in the construction of houses and construction of structures, carpentry and heavy construction.Sale in individual bag of 100 units.

Reference: PARAF00214

M5x25 bushing without rim

Bushing for solid materials, ideal for the application of medium and light loads. Produced in high quality polyamide. Its shape prevents rotation in the hole and guarantees a great precision and efficiency in the fixation. Uniform expansion due to its conical shape that guarantees the self-centering of the screw when it is applied to the bushing. Suitable...

Reference: PARAF00315

Bolt Steel Zinc plated 5x60 - Emb 100

Wood / chipboard screw.The screw is an essential fastening element for joining two elements in a non-permanent manner, adapted to fit tools such as cross or screwdrivers.It can be used in various products from automobiles, wood to appliances, among others. It is made with firm materials, which allows it to have excellent strength and durability.The zinc...

Reference: PARAF00317

Hood Nylon Sxt PCL502 Aluminum R9006 10mm

Cover in gray (aluminum), for hexagonal head screws. It is a versatile and functional piece, designed to provide finishing and protection in various applications. Made from high quality nylon, it offers resistance and durability, ensuring effectiveness even in adverse conditions. Dimensions: 10mm Sold individually.

Reference: PARAF00020