Water Pump Ref: BA-Jet100B
€159.80
Tax included
Operation
Fluid: Clean water and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 60 ºC
Maximum suction height: 9m
Maximum height 42 meters.
Flow rate 60L / min.
Constructive characteristics
Pump housing: Cast iron
Pump support: Cast iron
Impellers: Noryl or Brass
Diffusers: Noryl
Motor shaft: Stainless steel AISI 416
Mechanical seal: Ceramic / Graphite
Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP54 degree of protection and class B isolation. Single phase 220V - 50Hz with permanent capacitor. The motors must be thermally protected by the user.
Connections
Aspiration: 1 "
Compression: 1 "
Operation
Fluid: Clean water and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 60 ºC
Maximum suction height: 9m
Maximum height 42 meters.
Flow rate 60L / min.
Constructive characteristics
Pump housing: Cast iron
Pump support: Cast iron
Impellers: Noryl or Brass
Diffusers: Noryl
Motor shaft: Stainless steel AISI 416
Mechanical seal: Ceramic / Graphite
Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP54 degree of protection and class B isolation. Single phase 220V - 50Hz with permanent capacitor. The motors must be thermally protected by the user.
Connections
Aspiration: 1 "
Compression: 1 "
TUBMI00263
97897989 Items
Comments (0)
No customer reviews for the moment.
16 other products in the same category:
Viewed products
Operation
Fluid: Clean water and non-aggressive or viscous liquids, free of solid substances.
Maximum fluid temperature: 60 ºC
Maximum suction height: 9m
Maximum height 42 meters.
Flow rate 60L / min.
Constructive characteristics
Pump housing: Cast iron
Pump support: Cast iron
Impellers: Noryl or Brass
Diffusers: Noryl
Motor shaft: Stainless steel AISI 416
Mechanical seal: Ceramic / Graphite
Electric Motor
Two-pole induction type, closed and self-ventilated, suitable for continuous operation, with IP54 degree of protection and class B isolation. Single phase 220V - 50Hz with permanent capacitor. The motors must be thermally protected by the user.
Connections
Aspiration: 1 "
Compression: 1 "